THE WORLD IS BEAUTIFUL

by **azdewars** Fri 11 Sep 2015, 5:26 pm

To get started you only need Three(3) things:

1.CAT5 or CAT6 Ethernet cable of any length
2.Two(2) AA batteries (prefer rechargeable)
3.Electrical Tape

Locate the Ethernet cable ends. Tape a battery (positive end facing cable connector) ~3 inches from the connector. Repeat this step on other end of cable. You must use electrical tape as it conducts electricity.

You can repeat above step adding two(2) more batteries down the cable ~ three(3) inches from first set. No more than four(4) batteries.

The physics of this configuration is call "Magnetic Induction". Most cabling that consumers can purchase are limited on how much bandwidth they can hold due to resistance. Every cable has what is known as "internal resistance".

We are amplifying the signal going through the cable using magnetic induction. In short , If a megnetic field passes through the wire it will create a current.

OK. the proof is in the pudding. Go to www.speedtest.net and run test without our setup. Now run with our setup. Almost triple internet speed increase.

Thank You for Reading,
John (azdewars)

by **Paul** Fri 11 Sep 2015, 7:23 pm

Before applying battery
Triple Your Internet Speed for FREE Intern10

by **Paul** Fri 11 Sep 2015, 7:24 pm

After applying battery
Triple Your Internet Speed for FREE Intern11

by **Paul** Fri 11 Sep 2015, 7:28 pm

After refresh with battery
Triple Your Internet Speed for FREE Intern12

by **Paul** Fri 11 Sep 2015, 7:29 pm

Hmmm . I refreshed and it cut my download speed in half . Curious ?

by **Paul** Fri 11 Sep 2015, 7:35 pm

4th test , new server
Triple Your Internet Speed for FREE Intern13

by **azdewars** Sat 12 Sep 2015, 6:04 am

Triple Your Internet Speed for FREE 4657619464

before batteries attached

Paul, I've never seen numbers that high in my neck of the woods. It appears im at the end of a line which means crap. Between resistAnce and hacking into theres not much left for me. I started with no batteries at 7.34 and 0.43.
I noticed you used the word battery, its 1 battery per end = 2 batteries positive facing end of cable on both ends.
back to the drawing board. ty for running proto/sample run (s) appreciate it.
John (azdewars)